Skip to content

Citrix NetScaler ADC and Citrix NetScaler Gateway Security Bulletin - CITRIX

Support.Citrix • November 13, 2026

Citrix NetScaler ADC and Citrix NetScaler Gateway are affected by the vulnerabilities identified below CVE-ID Description Pre-conditions CWE CVSSv4 CVE-2026-120868 Memory overflow in Packet Processing can lead to unpredictable or erroneous behavior or Denial of Service. All NetScaler ADC and NetScaler Gateway deployments (Default configuration / No additional feature required) CWE-119: Improper Restriction of Operations within the Bounds of a Memory Buffer CVSS v4.0 Base Score: 9.3 (CVSS:4.0/AV:N/AC:L/AT:N/PR:N/UI:N/VC:H/VI:H/VA:H/SC:L/SI:L/SA:L) CVE-2026-107407 Memory overflow in SMPP traffic can lead to unpredictable or erroneous behavior or Denial of Service. NetScaler ADC is configured with a Load Balancing (LB) or Content Switching (CS) virtual server of type SMPP. CWE-119: Improper Restriction of Operations within the Bounds of a Memory Buffer CVSS v4.0 Base Score: 9.3 (CVSS:4.0/AV:N/AC:L/AT:N/PR:N/UI:N/VC:H/VI:H/VA:H/SC:L/SI:L/SA:L) CVE-2026-107408 Memory corruption in DNS / DNS-over-HTTPS (DoH) can lead to unpredictable or erroneous behavior or Denial of Service. NetScaler ADC is configured for DNS load balancing and recursive DNS resolution. CWE-787: Out-of-bounds Write CVSS v4.0 Base Score: 9.3 (CVSS:4.0/AV:N/AC:L/AT:N/PR:N/UI:N/VC:H/VI:H/VA:H/SC:L/SI:L/SA:L) CVE-2026-107409 Memory corruption in DNS-over-HTTPS (DoH) can lead to unpredictable or erroneous behavior or a Denial of Service NetScaler is configured with DNS Load Balancing over HTTPS (DOH). CWE-415: Double Free CVSS v4.0 Base Score: 9.3 (CVSS:4.0/AV:N/AC:L/AT:N/PR:N/UI:N/VC:H/VI:H/VA:H/SC:N/SI:N/SA:N) CVE-2026-107410 Memory overflow in NetScaler Push can lead to unpredictable or erroneous behavior or Denial of Service. NetScaler is configured as Load Balancing (LB) virtual server of type PUSH CWE-122: Heap-based Buffer Overflow CVSS v4.0 Base Score: 9.3 (CVSS:4.0/AV:N/AC:L/AT:N/PR:N/UI:N/VC:H/VI:H/VA:H/SC:L/SI:L/SA:L) CVE-2026-107411 Memory overflow in RTSP ALG can lead to unpredictable or erroneous behavior or Denial of Service. NetScaler ADC is configured with a Load Balancing (LB) virtual server of type RTSP or have RTSP ALG enabled on an LSN group. CWE-119: Improper Restriction of Operations within the Bounds of a Memory Buffer CVSS v4.0 Base Score: 8.7 (CVSS:4.0/AV:N/AC:L/AT:N/PR:N/UI:N/VC:N/VI:N/VA:H/SC:N/SI:N/SA:N) CVE-2026-107412 Multiple Memory overflow vulnerabilities can lead to unpredictable or erroneous behavior and Denial of Service NetScaler is configured as a Gateway (SSL VPN, ICA Proxy, CVPN, RDP Proxy) or an AAA virtual server CWE-119: Improper Restriction of Operations within the Bounds of a Memory Buffer CVSS v4.0 Base Score: 9.5 (CVSS:4.0/AV:N/AC:L/AT:P/PR:N/UI:N/VC:H/VI:H/VA:H/SC:H/SI:H/SA:H) CVE-2026-107413 Memory overflow in SAML authentication can lead to unpredictable or erroneous behavior or Denial of Service. NetScaler ADC or NetScaler Gateway is configured with a SAML action CWE-122: Heap-based Buffer Overflow CVSS v4.0 Base Score: 8.7 (CVSS:4.0/AV:N/AC:L/AT:N/PR:N/UI:N/VC:N/VI:N/VA:H/SC:N/SI:N/SA:N) CVE-2026-107414 Memory overflow in WebAuth authentication can lead to unpredictable or erroneous behavior or Denial of Service. NetScaler ADC or NetScaler Gateway is configured with a WebAuth action. CWE-122: Heap-based Buffer Overflow CVSS v4.0 Base Score: 8.7 (CVSS:4.0/AV:N/AC:L/AT:N/PR:N/UI:N/VC:N/VI:N/VA:H/SC:N/SI:N/SA:N) CVE-2026-107415 Memory overflow in Email OTP authentication can lead to unpredictable or erroneous behavior or Denial of Service. NetScaler ADC or NetScaler Gateway is configured with an Email Action. CWE-122: Heap-based Buffer Overflow CVSS v4.0 Base Score: 9.3 (CVSS:4.0/AV:N/AC:L/AT:N/PR:N/UI:N/VC:H/VI:H/VA:H/SC:L/SI:L/SA:L) CVE-2026-111340 Memory overflow in KBA (knowledge-based authentication) can lead to unpredictable or erroneous behavior or Denial of Service. NetScaler ADC or NetScaler Gateway is configured as either an LDAP action with KBAttribute or an Email action. CWE-121: Stack-based Buffer Overflow CVSS v4.0 Base Score: 8.7 (CVSS:4.0/AV:N/AC:L/AT:N/PR:N/UI:N/VC:N/VI:N/VA:H/SC:N/SI:N/SA:N) CVE-2026-111341 Memory overflow in client-certificate authentication can lead to unpredictable or erroneous behavior or Denial of Service. NetScaler ADC or NetScaler Gateway must be configured with a certificate authentication action (CertAction) CWE-120: Buffer Copy without Checking Size of Input CVSS v4.0 Base Score: 8.7 (CVSS:4.0/AV:N/AC:L/AT:N/PR:N/UI:N/VC:N/VI:N/VA:H/SC:N/SI:N/SA:N) CVE-2026-111342 Memory overflow in LDAP authentication can lead to unpredictable or erroneous behavior or Denial of Service. NetScaler is configured as a Gateway (SSL VPN, ICA Proxy, CVPN, RDP Proxy) or an AAA virtual server CWE-120: Buffer Copy without Checking Size of Input CVSS v4.0 Base Score: 8.7 (CVSS:4.0/AV:N/AC:L/AT:N/PR:N/UI:N/VC:N/VI:N/VA:H/SC:N/SI:N/SA:N) CVE-2026-111343 Memory overflow in an authentication request can lead to unpredictable or erroneous behavior or Denial of Service. NetScaler is configured as a Gateway (SSL VPN, ICA Proxy, CVPN, RDP Proxy) or an AAA virtual server CWE-120: Buffer Copy without Checking Size of Input CVSS v4.0 Base Score: 6.9 (CVSS:4.0/AV:L/AC:L/AT:N/PR:N/UI:N/VC:N/VI:N/VA:H/SC:L/SI:L/SA:L) CVE-2026-111344 Memory overflow in Endpoint Analysis (EPA/EPAS) can lead to unpredictable or erroneous behavior or a Denial of Service The NetScaler appliance is configured as a VPN virtual server or an authentication (AAA) virtual server with Endpoint Analysis (EPA). CWE-119: Improper Restriction of Operations within the Bounds of a Memory Buffer CVSS v4.0 Base Score: 9.3 (CVSS:4.0/AV:N/AC:L/AT:N/PR:N/UI:N/VC:H/VI:H/VA:H/SC:L/SI:L/SA:L) CVE-2026-111345 Improper request handling can lead to a denial-of-service / reboot-loop condition Appliance reachable as ADC/Gateway on the data path CWE-119: Improper Restriction of Operations within the Bounds of a Memory Buffer CVSS v4.0 Base Score: 6.9 (CVSS:4.0/AV:L/AC:L/AT:N/PR:N/UI:N/VC:N/VI:N/VA:H/SC:N/SI:N/SA:L) CVE-2026-111346 Memory overflow in HTTP/2 handling can lead to unpredictable or erroneous behavior or Denial of Service Any HTTP/SSL type virtual server with HTTP/2 enabled in the associated HTTP profile CWE-787: Out-of-bounds Write CVSS v4.0 Base Score: 8.3 (CVSS:4.0/AV:N/AC:L/AT:P/PR:N/UI:N/VC:L/VI:L/VA:H/SC:L/SI:L/SA:L) CVE-2026-111347 Memory overflow in Base64 decoding in advanced policy expressions leading to unpredictable or erroneous behavior or Denial of Service A policy containing the B64DECODE operator must be bound globally or to a virtual server of any type, and/or an Application Firewall (AppFW) must be configured CWE-122: Heap-based Buffer Overflow CVSS v4.0 Base Score: 8.7 (CVSS:4.0/AV:N/AC:L/AT:N/PR:N/UI:N/VC:N/VI:N/VA:H/SC:L/SI:L/SA:L) CVE-2026-111348 Sensitive authentication material written to a log file Local read access to /var/log/httperror.log on an appliance where any logout had occurred CWE-532: Insertion of Sensitive Information into Log File CVSS v4.0 Base Score:6.9 (CVSS:4.0/AV:L/AC:L/AT:N/PR:L/UI:A/VC:H/VI:H/VA:L/SC:L/SI:L/SA:L) CVE-2026-111349 Memory overflow in Application Firewall data decompression/inspection can lead to unpredictable or erroneous behavior or Denial of Service. AppFW profile with affected protections (XML protection, multipart form-data, content-type inference, request-body signature or API Security/gRPC/OpenAPI spec) CWE-122: Heap-based Buffer Overflow CVSS v4.0 Base Score:6.9 (CVSS:4.0/AV:L/AC:L/AT:N/PR:L/UI:A/VC:H/VI:H/VA:L/SC:L/SI:L/SA:L) CVE-2026-120860 Memory overflow in protocol load-balancing traffic handling (Diameter, SIP-over-TCP, MQTT, RADIUS) can lead to unpredictable or erroneous behavior or Denial of Service. NetScaler ADC must be configured as a Load Balancing (LB) virtual server of type DIAMETER, SIP_TCP, MQTT, or RADIUS. CWE-119: Improper Restriction of Operations within the Bounds of a Memory Buffer CVSS v4.0 Base Score: 8.7 (CVSS:4.0/AV:N/AC:L/AT:N/PR:N/UI:N/VC:N/VI:N/VA:H/SC:L/SI:L/SA:L) CVE-2026-120861 Memory overflow / improper handling in GSLB and geolocation (MEP, static-proximity, config-sync) can lead to unpredictable or erroneous behavior or Denial of Service. The NetScaler appliance must have any of the following configured: a GSLB site with Metric Exchange Protocol (MEP) enabled, GSLB static proximity, a geolocation responder policy, or GSLB automatic configuration synchronization. CWE-119: Improper Restriction of Operations within the Bounds of a Memory Buffer CVSS v4.0 Base Score: 8.7 (CVSS:4.0/AV:N/AC:L/AT:N/PR:N/UI:N/VC:N/VI:N/VA:H/SC:L/SI:L/SA:L) CVE-2026-120862 Memory overflow in SIP ALG (LSN) and DNS answer-section logging datapaths can lead to unpredictable or erroneous behavior or Denial of Service. The NetScaler appliance must have SIP ALG enabled on an LSN group OR DNS answer-section security logging enabled in a DNS profile. CWE-119: Improper Restriction of Operations within the Bounds of a Memory Buffer CVSS v4.0: 8.7 (CVSS:4.0/AV:N/AC:L/AT:N/PR:N/UI:N/VC:N/VI:N/VA:H/SC:L/SI:L/SA:L) CVE-2026-120863 Memory overflow in the management plane can lead to unpredictable or erroneous behavior or Denial of Service An attacker on an untrusted host must be able to reach the NetScaler appliance’s NSIP or NSIP6 address. CWE-119: Improper Restriction of Operations within the Bounds of a Memory Buffer CVSS v4.0 Base Score: 8.7 (CVSS:4.0/AV:N/AC:L/AT:N/PR:N/UI:N/VC:N/VI:N/VA:H/SC:N/SI:N/SA:N) CVE-2026-120864 Memory overflow in ICA proxy can lead to unpredictable or erroneous behavior or Denial of Service. The appliance must be configured as a Gateway vpn virtual server or an AAA virtual server or CR virtual server of type HDX CWE-119: Improper Restriction of Operations within the Bounds of a Memory Buffer CVSS v4.0 Base Score: 9.3 (CVSS:4.0/AV:N/AC:L/AT:N/PR:N/UI:N/VC:H/VI:H/VA:H/SC:N/SI:N/SA:N) CVE-2026-120865 Memory overflow in HTTP/3 (QUIC) can lead to unpredictable or erroneous behavior or Denial of Service. The NetScaler appliance must be configured as a Load Balancing (LB) or Content Switching (CS) virtual server of type HTTP_QUIC CWE-119: Improper Restriction of Operations within the Bounds of a Memory Buffer CVSS v4.0 Base Score: 8.7 (CVSS:4.0/AV:N/AC:L/AT:N/PR:N/UI:N/VC:N/VI:N/VA:H/SC:L/SI:L/SA:L) CVE-2026-120866 Memory overflow / improper handling in BGP dynamic routing can lead to unpredictable or erroneous behavior or Denial of Service. BGP dynamic routing must be enabled with a configured neighbor and without TCP-MD5 authentication for that neighbor. The attacker must be, or be able to spoof, the configured neighbor. CWE-787: Out-of-bounds Write CVSS v4.0 Base Score: 7.7 (CVSS:4.0/AV:A/AC:H/AT:N/PR:N/UI:N/VC:H/VI:H/VA:H/SC:L/SI:L/SA:L) CVE-2026-120867 Memory overflow in SSL/TLS/DTLS can lead to unpredictable or erroneous behavior or Denial of Service. The NetScaler appliance must be configured with TLS 1.3 vserver with ECH profile configured Or TLS 1.3 vserver on Intel QAT (Coleto) Platforms with ECH profile configured Or SSL vserver with SafeNet HSM Key bound CWE-119: Improper Restriction of Operations within the Bounds of a Memory Buffer CVSS v4.0 Base Score: 8.7 (CVSS:4.0/AV:N/AC:L/AT:N/PR:N/UI:N/VC:N/VI:N/VA:H/SC:L/SI:L/SA:L) What Customers Should Do Cloud Software Group strongly urges affected customers of NetScaler ADC and NetScaler Gateway to install the relevant updated versions as soon as possible. Citrix NetScaler ADC and Citrix NetScaler Gateway 14.1-73.57 and later releases Citrix NetScaler ADC and Citrix NetScaler Gateway 13.1-64.39 and later releases of 13.1 Citrix NetScaler ADC 14.1-FIPS 14.1-73.58 FIPS and later releases of 14.1-FIPS Citrix NetScaler ADC 13.1-FIPS and 13.1-NDcPP 13.1-37.293 and later releases of 13.1-FIPS and 13.1-NDcPP Steps to determine if a NetScaler deployment meets the CVE preconditions CVE-2026-120868 Precondition : All NetScaler ADC and NetScaler Gateway deployments (Default configuration / No additional feature required) Instructions : All NetScaler ADC and NetScaler Gateway deployments are affected, including those deployed with the default configuration. No additional features or settings need to be enabled for the NetScaler deployment to be vulnerable. CVE-2026-107407 Precondition : NetScaler ADC is configured with a Load Balancing (LB) or Content Switching (CS) virtual server of type SMPP. Instructions : Customers can determine if the appliance meets the precondition by inspecting their NetScaler configuration for entries matching either of the following patterns: add lb vserver .* SMPP add cs vserver .* SMPP CVE-2026-107408 Precondition : NetScaler ADC is configured for DNS load balancing and recursive DNS resolution. Instructions : Customers can determine if the appliance meets the preconditions by inspecting their NetScaler configuration for the following entries: Recursive resolution configuration: set dns parameter -recursion ENABLED add dns profile -recursiveResolution ENABLED DNS proxy configuration: add lb vserver DNS add lb vserver DNS_TCP add lb vserver DOT add lb vserver SSL -dnsOverHttps ENABLED add cs vserver DNS add cs vserver DNS_TCP add cs vserver DOT add cs vserver SSL -dnsOverHttps ENABLED CVE-2026-107409 Precondition : NetScaler is configured with DNS loadbalancing over HTTPS (DOH). Instructions : Customers can determine if the appliance meets the precondition by inspecting their NetScaler configuration for entries matching either of the following patterns: add lb vserver SSL -dnsoOverHttps ENABLED add cs vserver SSL -dnsOverHttps ENABLED CVE-2026-107410 Precondition : NetScaler is configured as Load Balancing (LB) virtual server of type PUSH Instructions : Customers can determine if the appliance meets the precondition by inspecting their NetScaler configuration as shown below: add lb vserver PUSH CVE-2026-107411 Precondition : NetScaler ADC is configured with a Load Balancing (LB) virtual server of type RTSP or have RTSP ALG enabled on an LSN group. Instructions : Customers can determine if the appliance meets the precondition by inspecting their NetScaler configuration for entries matching either of the following patterns: add lb vserver RTSP 554 add lsn group -clientname -rtspalg ENABLED CVE-2026-107412 Precondition : NetScaler is configured as a Gateway (SSL VPN, ICA Proxy, CVPN, RDP Proxy) or an AAA virtual server Instructions : Customers can determine if the appliance meets the precondition by inspecting their NetScaler configuration for entries matching either of the following: Gateway (SSL VPN, ICA Proxy, CVPN, RDP Proxy): add vpn vserver .* AAA virtual server: add authentication vserver .* CVE-2026-107413 Precondition : NetScaler ADC or NetScaler Gateway is configured with a SAML action Instructions : Instructions: Customers can determine whether their NetScaler deployment is configured as a SAML service provider (SP) by checking its configuration for entries matching the following: add authentication samlAction CVE-2026-107414 Precondition : NetScaler ADC or NetScaler Gateway is configured with a WebAuth action. Instructions : Customers can determine if the appliance meets the precondition by inspecting their NetScaler configuration for entries matching the following pattern: add authentication webAuthAction .* CVE-2026-107415 Precondition : NetScaler ADC or NetScaler Gateway is configured with an Email Action. Instructions : Customers can determine if the appliance meets the precondition by inspecting their NetScaler configuration for entries matching the following pattern: add authentication emailAction .* CVE-2026-111340 Precondition : NetScaler ADC or NetScaler Gateway is configured as either an LDAP action with KBAttribute configured or configured with an Email action. Instructions : Customers can determine if the appliance meets the precondition by inspecting their NetScaler configuration for entries matching either of the following: add authentication ldapAction .* -KBAttribute .* add authentication emailAction .* CVE-2026-111341 Precondition : NetScaler ADC or NetScaler Gateway must be configured with a certification authentication action (CertAction) Instructions : Customers can determine if the appliance meets the precondition by inspecting their NetScaler configuration for entries matching the following pattern: add authentication certAction .* CVE-2026-111342 Precondition : NetScaler is configured as a Gateway (SSL VPN, ICA Proxy, CVPN, RDP Proxy) or an AAA virtual server Instructions : Customers can determine whether their NetScaler deployment meets the precondition by inspecting their NetScaler configuration for entries matching either of the following: Gateway (SSL VPN, ICA Proxy, CVPN, RDP Proxy): add vpn vserver .* AAA virtual server: add authentication vserver .* CVE-2026-111343 Precondition : NetScaler is configured as a Gateway (SSL VPN, ICA Proxy, CVPN, RDP Proxy) or an AAA virtual server Instructions : Customers can determine whether their NetScaler deployment meets the precondition by inspecting their NetScaler configuration for entries matching either of the following: Gateway (SSL VPN, ICA Proxy, CVPN, RDP Proxy): add vpn vserver .* AAA virtual server: add authentication vserver .* CVE-2026-111344 Precondition : The NetScaler appliance is configured as a VPN virtual server or an authentication (AAA) virtual server with Endpoint Analysis (EPA). Instructions : Customers can determine whether their NetScaler deployment meets the precondition by inspecting their NetScaler configuration for entries matching either of the following: add authentication epaAction .* add aaa preauthenticationpolicy .* clientSecurity is configured in vpn parameter clientSecurity is configured in vpn sessionAction CVE-2026-111346 Precondition : Any HTTP/SSL type virtual server with HTTP/2 enabled in the associated HTTP profile Instructions : Profile Check: Identify if -http2 ENABLED is set on any HTTP profile. If none are found, the appliance is considered non-vulnerable. vServer Association: If such a profile exists, identify all LB, CS, and VPN vServers that reference it. Default Profile Handling: If the default profile nshttp_default_profile has -http2 enabled, identify all vServers that utilize this default profile. (i.e., those without an explicit -httpProfileName assignment). CVE-2026-111347 Precondition : A policy containing the B64DECODE operator must be bound globally or to a virtual server of any type, and/or an Application Firewall (AppFW) must be configured Instructions : Check for any policy expression with B64DECODE bound to any vserver Example: HTTP.REQ.BODY(10000).B64DECODE grep only for B64DECODE in the ns.conf, and if found, NetScaler is vulnerable CVE-2026-111349 Precondition : AppFW profile with affected protections (XML protection, multipart form-data, content-type inference, request-body signature or API Security/gRPC/OpenAPI spec) Instructions : Customers can determine if the appliance meets the precondition by inspecting their NetScaler configuration for the following entries: add appfw profile .* -apispec .* -grpcAction .* -signatures .* -postBodyLimitSignature .* -(XMLDoSAction|XMLFormatAction|XMLValidationAction|XMLWSIAction|XMLSQLInjectionAction|XMLXSSAction|XMLAttachmentAction|XMLSOAPFaultAction) .* -(fieldConsistencyAction|inferContentTypeXMLPayloadAction|SQLInjectionAction|fieldConsistencyAction|fieldFormatAction|startURLAction) .* -(excludeFileUploadFromChecks|sessionlessURLClosure|startURLClosure) CVE-2026-120860 Precondition : NetScaler ADC must be configured as a Load Balancing (LB) virtual server of type DIAMETER, SIP_TCP, MQTT, or RADIUS. Instructions : Customers can determine if the appliance meets the precondition by inspecting their NetScaler configuration for any of the following entries: add lb vserver DIAMETER add lb vserver SIP_TCP add lb vserver MQTT add lb vserver RADIUS CVE-2026-120861 Precondition : The NetScaler appliance must have any of the following configured: a GSLB site with Metric Exchange Protocol (MEP) enabled, GSLB static proximity, a geolocation responder policy, or GSLB automatic configuration synchronization. Instructions : Customers can determine if the appliance meets the precondition by inspecting their NetScaler configuration for any of the following entries: add gslb site -metricExchange ENABLED set gslb parameter -automaticConfigSync ENABLED add gslb vserver -lbmethod STATICPROXIMITY add responder policy "CLIENT.IP.SRC.MATCHES_LOCATION( )" CVE-2026-120862 Precondition : The NetScaler appliance must have SIP ALG enabled on an LSN group OR DNS answer-section security logging enabled in a DNS profile. Instructions : Customers can determine if the appliance meets the precondition by inspecting their NetScaler configuration for either of the following entries: SIP ALG enabled on an LSN group: add lsn group -clientname -sipalg ENABLED DNS answer-section security logging enabled in a DNS profile: add dns profile -dnsanswerSecLogging enABLED set dns profile default-dns-profile -dnsanswerSecLogging enABLED CVE-2026-120864 Precondition : The appliance must be configured as a Gateway vpn virtual server or an AAA virtual server or CR virtual server of type HDX Instructions : Customers can determine if the appliance meets the precondition by inspecting their NetScaler configuration for any of the following entries: add vpn vserver add authentication vserver add cr vserver HDX CVE-2026-120865 Precondition : The NetScaler appliance must be configured as a Load Balancing (LB) or Content Switching (CS) virtual server of type HTTP_QUIC Instructions : Customers can determine if the appliance meets the precondition by inspecting their NetScaler configuration for either of the following entries: add lb vserver HTTP_QUIC add cs vserver HTTP_QUIC CVE-2026-120866 Precondition : BGP dynamic routing must be enabled with a configured neighbor and without TCP-MD5 authentication for that neighbor. The attacker must be, or be able to spoof, the configured neighbor. Instructions : Check whether BGP is enabled and has a neighbor configured: 1. show ns feature -> BGP is ON 2. show router dynamicRouting -> output contains 'router bgp ' with at least one 'neighbor remote-as ' If BGP is OFF or no neighbor is configured, the appliance is not vulnerable. CVE-2026-120867 Precondition : 1.TLS 1.3 vserver with ECH profile configured 2.TLS1.3 vserver on Intel QAT (Coleto) Platforms with ECH profile configured 3. SSL vserver with SafeNet HSM Key bound Instructions : Customers can determine if the appliance meets the precondition by inspecting their NetScaler configuration for either of the following entries: set ssl parameter -defaultProfile ENABLED set ssl profile -tls13 ENABLED -SNIEnable ENABLED -encryptedClientHello ENABLED set ssl vserver -sslprofile add hsmKey -hsmType SAFENET -serialNum -password add ssl certKey -cert -hsmKey bind ssl vserver -certkeyName

Citrix NetScaler ADC and Citrix NetScaler Gateway are affected by the vulnerabilities identified below

Memory overflow in Packet Processing can lead to unpredictable or erroneous behavior or Denial of Service.

All NetScaler ADC and NetScaler Gateway deployments (Default configuration / No additional feature required)

CWE-119: Improper Restriction of Operations within the Bounds of a Memory Buffer

CVSS v4.0 Base Score: 9.3

(CVSS:4.0/AV:N/AC:L/AT:N/PR:N/UI:N/VC:H/VI:H/VA:H/SC:L/SI:L/SA:L)

Memory overflow in SMPP traffic can lead to unpredictable or erroneous behavior or Denial of Service.

NetScaler ADC is configured with a Load Balancing (LB) or Content Switching (CS) virtual server of type SMPP.

CWE-119: Improper Restriction of Operations within the Bounds of a Memory Buffer

CVSS v4.0 Base Score: 9.3

(CVSS:4.0/AV:N/AC:L/AT:N/PR:N/UI:N/VC:H/VI:H/VA:H/SC:L/SI:L/SA:L)

Memory corruption in DNS / DNS-over-HTTPS (DoH) can lead to unpredictable or erroneous behavior or Denial of Service.

NetScaler ADC is configured for DNS load balancing and recursive DNS resolution.

CWE-787: Out-of-bounds Write

CVSS v4.0 Base Score: 9.3

(CVSS:4.0/AV:N/AC:L/AT:N/PR:N/UI:N/VC:H/VI:H/VA:H/SC:L/SI:L/SA:L)

Memory corruption in DNS-over-HTTPS (DoH) can lead to unpredictable or erroneous behavior or a Denial of Service

NetScaler is configured with DNS Load Balancing over HTTPS (DOH).

CVSS v4.0 Base Score: 9.3

(CVSS:4.0/AV:N/AC:L/AT:N/PR:N/UI:N/VC:H/VI:H/VA:H/SC:N/SI:N/SA:N)

Memory overflow in NetScaler Push can lead to unpredictable or erroneous behavior or Denial of Service.

NetScaler is configured as Load Balancing (LB) virtual server of type PUSH

CWE-122: Heap-based Buffer Overflow

CVSS v4.0 Base Score: 9.3

(CVSS:4.0/AV:N/AC:L/AT:N/PR:N/UI:N/VC:H/VI:H/VA:H/SC:L/SI:L/SA:L)

Memory overflow in RTSP ALG can lead to unpredictable or erroneous behavior or Denial of Service.

NetScaler ADC is configured with a Load Balancing (LB) virtual server of type RTSP or have RTSP ALG enabled on an LSN group.

CWE-119: Improper Restriction of Operations within the Bounds of a Memory Buffer

CVSS v4.0 Base Score: 8.7

(CVSS:4.0/AV:N/AC:L/AT:N/PR:N/UI:N/VC:N/VI:N/VA:H/SC:N/SI:N/SA:N)

Multiple Memory overflow vulnerabilities can lead to unpredictable or erroneous behavior and Denial of Service

NetScaler is configured as a Gateway (SSL VPN, ICA Proxy, CVPN, RDP Proxy) or an AAA virtual server

CWE-119: Improper Restriction of Operations within the Bounds of a Memory Buffer

CVSS v4.0 Base Score: 9.5

(CVSS:4.0/AV:N/AC:L/AT:P/PR:N/UI:N/VC:H/VI:H/VA:H/SC:H/SI:H/SA:H)

Memory overflow in SAML authentication can lead to unpredictable or erroneous behavior or Denial of Service.

NetScaler ADC or NetScaler Gateway is configured with a SAML action

CWE-122: Heap-based Buffer Overflow

CVSS v4.0 Base Score: 8.7

(CVSS:4.0/AV:N/AC:L/AT:N/PR:N/UI:N/VC:N/VI:N/VA:H/SC:N/SI:N/SA:N)

Memory overflow in WebAuth authentication can lead to unpredictable or erroneous behavior or Denial of Service.

NetScaler ADC or NetScaler Gateway is configured with a WebAuth action.

CWE-122: Heap-based Buffer Overflow

CVSS v4.0 Base Score: 8.7

(CVSS:4.0/AV:N/AC:L/AT:N/PR:N/UI:N/VC:N/VI:N/VA:H/SC:N/SI:N/SA:N)

Memory overflow in Email OTP authentication can lead to unpredictable or erroneous behavior or Denial of Service.

NetScaler ADC or NetScaler Gateway is configured with an Email Action.

CWE-122: Heap-based Buffer Overflow

CVSS v4.0 Base Score: 9.3

(CVSS:4.0/AV:N/AC:L/AT:N/PR:N/UI:N/VC:H/VI:H/VA:H/SC:L/SI:L/SA:L)

Memory overflow in KBA (knowledge-based authentication) can lead to unpredictable or erroneous behavior or Denial of Service.

NetScaler ADC or NetScaler Gateway is configured as either an LDAP action with KBAttribute or an Email action.

CWE-121: Stack-based Buffer Overflow

CVSS v4.0 Base Score: 8.7

(CVSS:4.0/AV:N/AC:L/AT:N/PR:N/UI:N/VC:N/VI:N/VA:H/SC:N/SI:N/SA:N)

Memory overflow in client-certificate authentication can lead to unpredictable or erroneous behavior or Denial of Service.

NetScaler ADC or NetScaler Gateway must be configured with a certificate authentication action (CertAction)

CWE-120: Buffer Copy without Checking Size of Input

CVSS v4.0 Base Score: 8.7

(CVSS:4.0/AV:N/AC:L/AT:N/PR:N/UI:N/VC:N/VI:N/VA:H/SC:N/SI:N/SA:N)

Memory overflow in LDAP authentication can lead to unpredictable or erroneous behavior or Denial of Service.

NetScaler is configured as a Gateway (SSL VPN, ICA Proxy, CVPN, RDP Proxy) or an AAA virtual server

CWE-120: Buffer Copy without Checking Size of Input

CVSS v4.0 Base Score: 8.7

(CVSS:4.0/AV:N/AC:L/AT:N/PR:N/UI:N/VC:N/VI:N/VA:H/SC:N/SI:N/SA:N)

Memory overflow in an authentication request can lead to unpredictable or erroneous behavior or Denial of Service.

NetScaler is configured as a Gateway (SSL VPN, ICA Proxy, CVPN, RDP Proxy) or an AAA virtual server

CWE-120: Buffer Copy without Checking Size of Input

CVSS v4.0 Base Score: 6.9

(CVSS:4.0/AV:L/AC:L/AT:N/PR:N/UI:N/VC:N/VI:N/VA:H/SC:L/SI:L/SA:L)

Memory overflow in Endpoint Analysis (EPA/EPAS) can lead to unpredictable or erroneous behavior or a Denial of Service

The NetScaler appliance is configured as a VPN virtual server or an authentication (AAA) virtual server with Endpoint Analysis (EPA).

CWE-119: Improper Restriction of Operations within the Bounds of a Memory Buffer

CVSS v4.0 Base Score: 9.3

(CVSS:4.0/AV:N/AC:L/AT:N/PR:N/UI:N/VC:H/VI:H/VA:H/SC:L/SI:L/SA:L)

Improper request handling can lead to a denial-of-service / reboot-loop condition

Appliance reachable as ADC/Gateway on the data path

CWE-119: Improper Restriction of Operations within the Bounds of a Memory Buffer

CVSS v4.0 Base Score: 6.9

(CVSS:4.0/AV:L/AC:L/AT:N/PR:N/UI:N/VC:N/VI:N/VA:H/SC:N/SI:N/SA:L)

Memory overflow in HTTP/2 handling can lead to unpredictable or erroneous behavior or Denial of Service

Any HTTP/SSL type virtual server with HTTP/2 enabled in the associated HTTP profile

CWE-787: Out-of-bounds Write

CVSS v4.0 Base Score: 8.3

(CVSS:4.0/AV:N/AC:L/AT:P/PR:N/UI:N/VC:L/VI:L/VA:H/SC:L/SI:L/SA:L)

Memory overflow in Base64 decoding in advanced policy expressions leading to unpredictable or erroneous behavior or Denial of Service

A policy containing the B64DECODE operator must be bound globally or to a virtual server of any type, and/or an Application Firewall (AppFW) must be configured

CWE-122: Heap-based Buffer Overflow

CVSS v4.0 Base Score: 8.7 (CVSS:4.0/AV:N/AC:L/AT:N/PR:N/UI:N/VC:N/VI:N/VA:H/SC:L/SI:L/SA:L)

Sensitive authentication material written to a log file

Local read access to /var/log/httperror.log on an appliance where any logout had occurred

CWE-532: Insertion of Sensitive Information into Log File

CVSS v4.0 Base Score:6.9

(CVSS:4.0/AV:L/AC:L/AT:N/PR:L/UI:A/VC:H/VI:H/VA:L/SC:L/SI:L/SA:L)

Memory overflow in Application Firewall data decompression/inspection can lead to unpredictable or erroneous behavior or Denial of Service.

AppFW profile with affected protections (XML protection, multipart form-data, content-type inference, request-body signature or API Security/gRPC/OpenAPI spec)

CWE-122: Heap-based Buffer Overflow

CVSS v4.0 Base Score:6.9

(CVSS:4.0/AV:L/AC:L/AT:N/PR:L/UI:A/VC:H/VI:H/VA:L/SC:L/SI:L/SA:L)

Memory overflow in protocol load-balancing traffic handling (Diameter, SIP-over-TCP, MQTT, RADIUS) can lead to unpredictable or erroneous behavior or Denial of Service.

NetScaler ADC must be configured as a Load Balancing (LB) virtual server of type DIAMETER, SIP_TCP, MQTT, or RADIUS.

CWE-119: Improper Restriction of Operations within the Bounds of a Memory Buffer

CVSS v4.0 Base Score: 8.7

(CVSS:4.0/AV:N/AC:L/AT:N/PR:N/UI:N/VC:N/VI:N/VA:H/SC:L/SI:L/SA:L)

Memory overflow / improper handling in GSLB and geolocation (MEP, static-proximity, config-sync) can lead to unpredictable or erroneous behavior or Denial of Service.

The NetScaler appliance must have any of the following configured: a GSLB site with Metric Exchange Protocol (MEP) enabled, GSLB static proximity, a geolocation responder policy, or GSLB automatic configuration synchronization.

CWE-119: Improper Restriction of Operations within the Bounds of a Memory Buffer

CVSS v4.0 Base Score: 8.7

(CVSS:4.0/AV:N/AC:L/AT:N/PR:N/UI:N/VC:N/VI:N/VA:H/SC:L/SI:L/SA:L)

Memory overflow in SIP ALG (LSN) and DNS answer-section logging datapaths can lead to unpredictable or erroneous behavior or Denial of Service.

The NetScaler appliance must have SIP ALG enabled on an LSN group OR DNS answer-section security logging enabled in a DNS profile.

CWE-119: Improper Restriction of Operations within the Bounds of a Memory Buffer

(CVSS:4.0/AV:N/AC:L/AT:N/PR:N/UI:N/VC:N/VI:N/VA:H/SC:L/SI:L/SA:L)

Memory overflow in the management plane can lead to unpredictable or erroneous behavior or Denial of Service

An attacker on an untrusted host must be able to reach the NetScaler appliance’s NSIP or NSIP6 address.

CWE-119: Improper Restriction of Operations within the Bounds of a Memory Buffer

CVSS v4.0 Base Score: 8.7

(CVSS:4.0/AV:N/AC:L/AT:N/PR:N/UI:N/VC:N/VI:N/VA:H/SC:N/SI:N/SA:N)

Memory overflow in ICA proxy can lead to unpredictable or erroneous behavior or Denial of Service.

The appliance must be configured as a Gateway vpn virtual server or an AAA virtual server or CR virtual server of type HDX

CWE-119: Improper Restriction of Operations within the Bounds of a Memory Buffer

CVSS v4.0 Base Score: 9.3

(CVSS:4.0/AV:N/AC:L/AT:N/PR:N/UI:N/VC:H/VI:H/VA:H/SC:N/SI:N/SA:N)

Memory overflow in HTTP/3 (QUIC) can lead to unpredictable or erroneous behavior or Denial of Service.

The NetScaler appliance must be configured as a Load Balancing (LB) or Content Switching (CS) virtual server of type HTTP_QUIC

CWE-119: Improper Restriction of Operations within the Bounds of a Memory Buffer

CVSS v4.0 Base Score: 8.7

(CVSS:4.0/AV:N/AC:L/AT:N/PR:N/UI:N/VC:N/VI:N/VA:H/SC:L/SI:L/SA:L)

Memory overflow / improper handling in BGP dynamic routing can lead to unpredictable or erroneous behavior or Denial of Service.

BGP dynamic routing must be enabled with a configured neighbor and without TCP-MD5 authentication for that neighbor. The attacker must be, or be able to spoof, the configured neighbor.

CWE-787: Out-of-bounds Write

CVSS v4.0 Base Score: 7.7

(CVSS:4.0/AV:A/AC:H/AT:N/PR:N/UI:N/VC:H/VI:H/VA:H/SC:L/SI:L/SA:L)

Memory overflow in SSL/TLS/DTLS can lead to unpredictable or erroneous behavior or Denial of Service.

The NetScaler appliance must be configured with TLS 1.3 vserver with ECH profile configured

TLS 1.3 vserver on Intel QAT (Coleto) Platforms with ECH profile configured

SSL vserver with SafeNet HSM Key bound

CWE-119: Improper Restriction of Operations within the Bounds of a Memory Buffer

CVSS v4.0 Base Score: 8.7

(CVSS:4.0/AV:N/AC:L/AT:N/PR:N/UI:N/VC:N/VI:N/VA:H/SC:L/SI:L/SA:L)

What Customers Should Do

Cloud Software Group strongly urges affected customers of NetScaler ADC and NetScaler Gateway to install the relevant updated versions as soon as possible.

Citrix NetScaler ADC and Citrix NetScaler Gateway 14.1-73.57 and later releases

Citrix NetScaler ADC and Citrix NetScaler Gateway 13.1-64.39 and later releases of 13.1

Citrix NetScaler ADC 14.1-FIPS 14.1-73.58 FIPS and later releases of 14.1-FIPS

Citrix NetScaler ADC 13.1-FIPS and 13.1-NDcPP 13.1-37.293 and later releases of 13.1-FIPS and 13.1-NDcPP

Steps to determine if a NetScaler deployment meets the CVE preconditions

CVE-2026-120868 Precondition : All NetScaler ADC and NetScaler Gateway deployments (Default configuration / No additional feature required) Instructions : All NetScaler ADC and NetScaler Gateway deployments are affected, including those deployed with the default configuration. No additional features or settings need to be enabled for the NetScaler deployment to be vulnerable.

CVE-2026-107407 Precondition : NetScaler ADC is configured with a Load Balancing (LB) or Content Switching (CS) virtual server of type SMPP. Instructions : Customers can determine if the appliance meets the precondition by inspecting their NetScaler configuration for entries matching either of the following patterns:

add lb vserver .* SMPP

add cs vserver .* SMPP

CVE-2026-107408 Precondition : NetScaler ADC is configured for DNS load balancing and recursive DNS resolution. Instructions : Customers can determine if the appliance meets the preconditions by inspecting their NetScaler configuration for the following entries:

Recursive resolution configuration:

set dns parameter -recursion ENABLED

add dns profile -recursiveResolution ENABLED

DNS proxy configuration:

add lb vserver DNS

add lb vserver DNS_TCP

add lb vserver DOT

add lb vserver SSL -dnsOverHttps ENABLED

add cs vserver DNS

add cs vserver DNS_TCP

add cs vserver DOT

add cs vserver SSL -dnsOverHttps ENABLED

CVE-2026-107409 Precondition : NetScaler is configured with DNS loadbalancing over HTTPS (DOH). Instructions : Customers can determine if the appliance meets the precondition by inspecting their NetScaler configuration for entries matching either of the following patterns:

add lb vserver SSL -dnsoOverHttps ENABLED

add cs vserver SSL -dnsOverHttps ENABLED

CVE-2026-107410 Precondition : NetScaler is configured as Load Balancing (LB) virtual server of type PUSH Instructions : Customers can determine if the appliance meets the precondition by inspecting their NetScaler configuration as shown below:

add lb vserver PUSH

CVE-2026-107411 Precondition : NetScaler ADC is configured with a Load Balancing (LB) virtual server of type RTSP or have RTSP ALG enabled on an LSN group. Instructions : Customers can determine if the appliance meets the precondition by inspecting their NetScaler configuration for entries matching either of the following patterns:

add lb vserver RTSP 554

add lsn group -clientname -rtspalg ENABLED

CVE-2026-107412 Precondition : NetScaler is configured as a Gateway (SSL VPN, ICA Proxy, CVPN, RDP Proxy) or an AAA virtual server Instructions : Customers can determine if the appliance meets the precondition by inspecting their NetScaler configuration for entries matching either of the following:

Gateway (SSL VPN, ICA Proxy, CVPN, RDP Proxy):

add authentication vserver .*

CVE-2026-107413 Precondition : NetScaler ADC or NetScaler Gateway is configured with a SAML action Instructions : Instructions: Customers can determine whether their NetScaler deployment is configured as a SAML service provider (SP) by checking its configuration for entries matching the following:

add authentication samlAction

CVE-2026-107414 Precondition : NetScaler ADC or NetScaler Gateway is configured with a WebAuth action. Instructions : Customers can determine if the appliance meets the precondition by inspecting their NetScaler configuration for entries matching the following pattern:

add authentication webAuthAction .*

CVE-2026-107415 Precondition : NetScaler ADC or NetScaler Gateway is configured with an Email Action. Instructions : Customers can determine if the appliance meets the precondition by inspecting their NetScaler configuration for entries matching the following pattern:

add authentication emailAction .*

CVE-2026-111340 Precondition : NetScaler ADC or NetScaler Gateway is configured as either an LDAP action with KBAttribute configured or configured with an Email action. Instructions : Customers can determine if the appliance meets the precondition by inspecting their NetScaler configuration for entries matching either of the following:

add authentication ldapAction .* -KBAttribute .*

add authentication emailAction .*

CVE-2026-111341 Precondition : NetScaler ADC or NetScaler Gateway must be configured with a certification authentication action (CertAction) Instructions : Customers can determine if the appliance meets the precondition by inspecting their NetScaler configuration for entries matching the following pattern:

add authentication certAction .*

CVE-2026-111342 Precondition : NetScaler is configured as a Gateway (SSL VPN, ICA Proxy, CVPN, RDP Proxy) or an AAA virtual server Instructions : Customers can determine whether their NetScaler deployment meets the precondition by inspecting their NetScaler configuration for entries matching either of the following:

Gateway (SSL VPN, ICA Proxy, CVPN, RDP Proxy):

add authentication vserver .*

CVE-2026-111343 Precondition : NetScaler is configured as a Gateway (SSL VPN, ICA Proxy, CVPN, RDP Proxy) or an AAA virtual server Instructions : Customers can determine whether their NetScaler deployment meets the precondition by inspecting their NetScaler configuration for entries matching either of the following:

Gateway (SSL VPN, ICA Proxy, CVPN, RDP Proxy):

add authentication vserver .*

CVE-2026-111344 Precondition : The NetScaler appliance is configured as a VPN virtual server or an authentication (AAA) virtual server with Endpoint Analysis (EPA). Instructions : Customers can determine whether their NetScaler deployment meets the precondition by inspecting their NetScaler configuration for entries matching either of the following:

add authentication epaAction .*

add aaa preauthenticationpolicy .*

clientSecurity is configured in vpn parameter

clientSecurity is configured in vpn sessionAction

CVE-2026-111346 Precondition : Any HTTP/SSL type virtual server with HTTP/2 enabled in the associated HTTP profile Instructions : Profile Check: Identify if -http2 ENABLED is set on any HTTP profile. If none are found, the appliance is considered non-vulnerable. vServer Association: If such a profile exists, identify all LB, CS, and VPN vServers that reference it. Default Profile Handling: If the default profile nshttp_default_profile has -http2 enabled, identify all vServers that utilize this default profile. (i.e., those without an explicit -httpProfileName assignment).

CVE-2026-111347 Precondition : A policy containing the B64DECODE operator must be bound globally or to a virtual server of any type, and/or an Application Firewall (AppFW) must be configured Instructions : Check for any policy expression with B64DECODE bound to any vserver Example: HTTP.REQ.BODY(10000).B64DECODE grep only for B64DECODE in the ns.conf, and if found, NetScaler is vulnerable

CVE-2026-111349 Precondition : AppFW profile with affected protections (XML protection, multipart form-data, content-type inference, request-body signature or API Security/gRPC/OpenAPI spec) Instructions : Customers can determine if the appliance meets the precondition by inspecting their NetScaler configuration for the following entries:

add appfw profile .* -apispec .* -grpcAction .* -signatures .* -postBodyLimitSignature .* -(XMLDoSAction|XMLFormatAction|XMLValidationAction|XMLWSIAction|XMLSQLInjectionAction|XMLXSSAction|XMLAttachmentAction|XMLSOAPFaultAction) .* -(fieldConsistencyAction|inferContentTypeXMLPayloadAction|SQLInjectionAction|fieldConsistencyAction|fieldFormatAction|startURLAction) .* -(excludeFileUploadFromChecks|sessionlessURLClosure|startURLClosure)

CVE-2026-120860 Precondition : NetScaler ADC must be configured as a Load Balancing (LB) virtual server of type DIAMETER, SIP_TCP, MQTT, or RADIUS. Instructions : Customers can determine if the appliance meets the precondition by inspecting their NetScaler configuration for any of the following entries:

add lb vserver DIAMETER

add lb vserver SIP_TCP

add lb vserver MQTT

add lb vserver RADIUS

CVE-2026-120861 Precondition : The NetScaler appliance must have any of the following configured: a GSLB site with Metric Exchange Protocol (MEP) enabled, GSLB static proximity, a geolocation responder policy, or GSLB automatic configuration synchronization. Instructions : Customers can determine if the appliance meets the precondition by inspecting their NetScaler configuration for any of the following entries:

add gslb site -metricExchange ENABLED

set gslb parameter -automaticConfigSync ENABLED

add gslb vserver -lbmethod STATICPROXIMITY

add responder policy "CLIENT.IP.SRC.MATCHES_LOCATION( )"

CVE-2026-120862 Precondition : The NetScaler appliance must have SIP ALG enabled on an LSN group OR DNS answer-section security logging enabled in a DNS profile. Instructions : Customers can determine if the appliance meets the precondition by inspecting their NetScaler configuration for either of the following entries:

SIP ALG enabled on an LSN group:

add lsn group -clientname -sipalg ENABLED

DNS answer-section security logging enabled in a DNS profile:

add dns profile -dnsanswerSecLogging enABLED

set dns profile default-dns-profile -dnsanswerSecLogging enABLED

CVE-2026-120864 Precondition : The appliance must be configured as a Gateway vpn virtual server or an AAA virtual server or CR virtual server of type HDX Instructions : Customers can determine if the appliance meets the precondition by inspecting their NetScaler configuration for any of the following entries:

add vpn vserver

add authentication vserver

add cr vserver HDX

CVE-2026-120865 Precondition : The NetScaler appliance must be configured as a Load Balancing (LB) or Content Switching (CS) virtual server of type HTTP_QUIC Instructions : Customers can determine if the appliance meets the precondition by inspecting their NetScaler configuration for either of the following entries:

add lb vserver HTTP_QUIC

add cs vserver HTTP_QUIC

CVE-2026-120866 Precondition : BGP dynamic routing must be enabled with a configured neighbor and without TCP-MD5 authentication for that neighbor. The attacker must be, or be able to spoof, the configured neighbor. Instructions : Check whether BGP is enabled and has a neighbor configured: 1. show ns feature -> BGP is ON 2. show router dynamicRouting -> output contains 'router bgp ' with at least one 'neighbor remote-as ' If BGP is OFF or no neighbor is configured, the appliance is not vulnerable.

CVE-2026-120867 Precondition : 1.TLS 1.3 vserver with ECH profile configured 2.TLS1.3 vserver on Intel QAT (Coleto) Platforms with ECH profile configured 3. SSL vserver with SafeNet HSM Key bound Instructions : Customers can determine if the appliance meets the precondition by inspecting their NetScaler configuration for either of the following entries:

set ssl parameter -defaultProfile ENABLED

set ssl profile -tls13 ENABLED -SNIEnable ENABLED -encryptedClientHello ENABLED

set ssl vserver -sslprofile

add hsmKey -hsmType SAFENET -serialNum -password

add ssl certKey -cert -hsmKey

bind ssl vserver -certkeyName

Description of Problem

Multiple vulnerabilities have been discovered in Citrix NetScaler ADC (formerly Citrix ADC) and Citrix NetScaler Gateway (formerly Citrix Gateway). Refer below for further details.

The following supported versions of Citrix NetScaler ADC and Citrix NetScaler Gateway are affected by the vulnerabilities: Citrix NetScaler ADC and Citrix NetScaler Gateway 14.1 BEFORE 14.1-73.57 Citrix NetScaler ADC and Citrix NetScaler Gateway 13.1 BEFORE 13.1-64.39 Citrix NetScaler ADC FIPS BEFORE 14.1-73.58 FIPS Citrix NetScaler ADC FIPS and NDcPP BEFORE 13.1-37.293

Additional Note : Secure Private Access Hybrid deployments using NetScaler instances are also affected by the vulnerabilities. Customers need to upgrade these NetScaler instances to the recommended NetScaler builds to address the vulnerabilities. This bulletin only applies to customer-managed Citrix NetScaler ADC (“NetScaler ADC”) and Citrix NetScaler Gateway (“NetScaler Gateway”). Cloud Software Group upgrades the Citrix-managed cloud services and Citrix-managed Adaptive Authentication with the necessary software updates.

Additional Information

Cloud Software Group acknowledges Michael Tucker, Chew Keong Tan of the XOR team at JPMorgan Chase, Himanshu Anand (@anand_himanshu) of watchTowr, and Sina Kheirkhah (SinSinology) of watchTowr, for working with us to protect our customers.

In addition, the Cloud Software Group Product Security Team identified several vulnerabilities through advanced AI-assisted code analysis.

Citrix is notifying customers and channel partners this potential security issue through the publication of this security bulletin on the Citrix Knowledge Center at

Obtaining Support on This Issue

If you require technical assistance with this issue, please Citrix Technical Support. details for Citrix Technical Support are available at

Reporting Security Vulnerabilities to Citrix

Citrix welcomes input regarding the security of its products and considers any and all potential vulnerabilities seriously. For details on our vulnerability response process and guidance on how to report security-related issues to Citrix, please see the following webpage: