Skip to content

K000164314: Multiple PHP vulnerabilities

My.F5 • November 20, 2026

Final- This article is marked as 'Final' because the security issue described in this article either affected F5 products at one time and was resolved or it never affected F5 products. Unless new information is discovered, F5 will no longer update the article.

Security Advisory Description

CVE-2026-129474 Use-after-free in magic method backtraces can lead to remote code execution. When collecting the arguments of a method call handled by __call() or __callStatic() for a backtrace, PHP can read stale values that may refer to freed memory. If a fatal error such as exceeding memory_limit occurs while an application enters such a call, with fatal_error_backtraces enabled (the default) and zend.exception_ignore_args disabled, a remote attacker who controls enough request data to influence memory allocation may cause memory corruption, crash the PHP worker or, with knowledge of memory addresses, execute arbitrary code. php.ini-production enables zend.exception_ignore_args, which prevents this. This issue affects PHP versions 8.5.* before 8.5.13.

Use-after-free in magic method backtraces can lead to remote code execution. When collecting the arguments of a method call handled by __call() or __callStatic() for a backtrace, PHP can read stale values that may refer to freed memory. If a fatal error such as exceeding memory_limit occurs while an application enters such a call, with fatal_error_backtraces enabled (the default) and zend.exception_ignore_args disabled, a remote attacker who controls enough request data to influence memory allocation may cause memory corruption, crash the PHP worker or, with knowledge of memory addresses, execute arbitrary code. php.ini-production enables zend.exception_ignore_args, which prevents this. This issue affects PHP versions 8.5.* before 8.5.13.

CVE-2026-129182 Use-after-free via repopulation of last_fatal_error_backtrace global after shutdown. A fatal error raised while modified INI settings are restored during request shutdown can repopulate the stored fatal error backtrace after the executor has been cleaned up. The request memory is then freed, and a diagnostic emitted before executor initialization in a later request handled by the same PHP-FPM or mod_php worker can access the stale backtrace. The shutdown error requires per-path configuration of max_memory_limit, or of zlib.output_compression together with output_handler (which .user.ini can also set). The early diagnostic requires Apache per-directory configuration or, for PHP-FPM, a PHP_VALUE or PHP_ADMIN_VALUE parameter sent by the front end. This can cause memory corruption and worker crashes, and may allow remote code execution. This issue affects PHP versions 8.5.* before 8.5.13.

Use-after-free via repopulation of last_fatal_error_backtrace global after shutdown. A fatal error raised while modified INI settings are restored during request shutdown can repopulate the stored fatal error backtrace after the executor has been cleaned up. The request memory is then freed, and a diagnostic emitted before executor initialization in a later request handled by the same PHP-FPM or mod_php worker can access the stale backtrace. The shutdown error requires per-path configuration of max_memory_limit, or of zlib.output_compression together with output_handler (which .user.ini can also set). The early diagnostic requires Apache per-directory configuration or, for PHP-FPM, a PHP_VALUE or PHP_ADMIN_VALUE parameter sent by the front end. This can cause memory corruption and worker crashes, and may allow remote code execution. This issue affects PHP versions 8.5.* before 8.5.13.

CVE-2026-129496 Timezone cache use-after-free can lead to remote code execution. In non-thread-safe builds, a diagnostic written to a file-based error_log during module startup, for example for an invalid date.timezone value or a session configuration warning, causes the timezone cache to be allocated in startup memory that is freed while a reference to it is kept. A diagnostic raised early in the first request of a worker, such as the max_input_vars warning, then accesses the freed cache. On such a deployment an unauthenticated remote attacker can crash PHP-FPM, Apache mod_php or CGI workers with a crafted request. Arbitrary code execution may be possible and has been demonstrated with known memory addresses. This issue affects PHP versions before 8.2.36, 8.3.* before 8.3.37, 8.4.* before 8.4.28 and 8.5.* before 8.5.13.

Timezone cache use-after-free can lead to remote code execution. In non-thread-safe builds, a diagnostic written to a file-based error_log during module startup, for example for an invalid date.timezone value or a session configuration warning, causes the timezone cache to be allocated in startup memory that is freed while a reference to it is kept. A diagnostic raised early in the first request of a worker, such as the max_input_vars warning, then accesses the freed cache. On such a deployment an unauthenticated remote attacker can crash PHP-FPM, Apache mod_php or CGI workers with a crafted request. Arbitrary code execution may be possible and has been demonstrated with known memory addresses. This issue affects PHP versions before 8.2.36, 8.3.* before 8.3.37, 8.4.* before 8.4.28 and 8.5.* before 8.5.13.

CVE-2026-129481 Use-after-free after interrupted session shutdown. The session extension records the filename of the executing script when a session starts. If a fatal error occurs in an application callback while the session variables are destroyed at shutdown, such as stream_close() of a user-defined stream wrapper, the pointer is retained after the request memory is freed, and a later request handled by the same worker can free the stale string. An attacker who can trigger such a failing cleanup may crash the worker or corrupt memory; code execution has not been demonstrated. This requires the filename to be allocated in request memory, for example when the script is not cached by OPcache. This issue affects PHP versions 8.3.* before 8.3.37, 8.4.* before 8.4.28 and 8.5.* before 8.5.13.

Use-after-free after interrupted session shutdown. The session extension records the filename of the executing script when a session starts. If a fatal error occurs in an application callback while the session variables are destroyed at shutdown, such as stream_close() of a user-defined stream wrapper, the pointer is retained after the request memory is freed, and a later request handled by the same worker can free the stale string. An attacker who can trigger such a failing cleanup may crash the worker or corrupt memory; code execution has not been demonstrated. This requires the filename to be allocated in request memory, for example when the script is not cached by OPcache. This issue affects PHP versions 8.3.* before 8.3.37, 8.4.* before 8.4.28 and 8.5.* before 8.5.13.

CVE-2026-129289 PHP-FPM request smuggling through an unread HTTP request body. PHP does not discard the unread part of an HTTP request body at request shutdown when the application has opened php://input without reading it to the end. When the front end reuses backend connections, which is not the default in nginx or Apache (for example nginx with fastcgi_keep_conn on, or Apache mod_proxy_fcgi with enablereuse=on), PHP-FPM can parse the leftover bytes as a new FastCGI request. An unauthenticated remote attacker can use a single crafted multipart/form-data request to forge a backend request with chosen parameters such as SCRIPT_FILENAME, REMOTE_ADDR and PHP_ADMIN_VALUE, which can lead to execution of attacker-controlled PHP code. With LSAPI, subsequent requests on the connection can be disrupted. This issue affects PHP versions before 8.2.36, 8.3.* before 8.3.37, 8.4.* before 8.4.28 and 8.5.* before 8.5.13.

PHP-FPM request smuggling through an unread HTTP request body. PHP does not discard the unread part of an HTTP request body at request shutdown when the application has opened php://input without reading it to the end. When the front end reuses backend connections, which is not the default in nginx or Apache (for example nginx with fastcgi_keep_conn on, or Apache mod_proxy_fcgi with enablereuse=on), PHP-FPM can parse the leftover bytes as a new FastCGI request. An unauthenticated remote attacker can use a single crafted multipart/form-data request to forge a backend request with chosen parameters such as SCRIPT_FILENAME, REMOTE_ADDR and PHP_ADMIN_VALUE, which can lead to execution of attacker-controlled PHP code. With LSAPI, subsequent requests on the connection can be disrupted. This issue affects PHP versions before 8.2.36, 8.3.* before 8.3.37, 8.4.* before 8.4.28 and 8.5.* before 8.5.13.

CVE-2026-129291 PHP-FPM epoll use-after-free can lead to local privilege escalation. When catch_workers_output is enabled and the epoll event backend is used, the PHP-FPM master can close a worker's output pipe in fpm_child_close() without removing the associated event, and the delayed cleanup can free the worker record while its epoll registration is still active. A later event is then dispatched through a pointer into freed memory. A local attacker who can execute PHP code in an FPM worker can crash the master or execute code with its privileges, commonly root. catch_workers_output is disabled by default but enabled in the official PHP-FPM Docker images. This issue affects PHP versions from 8.1.20 through 8.1.34, from 8.2.7 before 8.2.36, 8.3.* before 8.3.37, 8.4.* before 8.4.28 and 8.5.* before 8.5.13.

PHP-FPM epoll use-after-free can lead to local privilege escalation. When catch_workers_output is enabled and the epoll event backend is used, the PHP-FPM master can close a worker's output pipe in fpm_child_close() without removing the associated event, and the delayed cleanup can free the worker record while its epoll registration is still active. A later event is then dispatched through a pointer into freed memory. A local attacker who can execute PHP code in an FPM worker can crash the master or execute code with its privileges, commonly root. catch_workers_output is disabled by default but enabled in the official PHP-FPM Docker images. This issue affects PHP versions from 8.1.20 through 8.1.34, from 8.2.7 before 8.2.36, 8.3.* before 8.3.37, 8.4.* before 8.4.28 and 8.5.* before 8.5.13.

CVE-2026-127960 Denial of service through folded HTTP response headers. The HTTP stream wrapper joins each continuation line of a folded response header to the accumulated value by allocating a new string and copying the whole value, so a response with many short continuation lines takes disproportionate CPU time to parse. An attacker who controls an HTTP or HTTPS response fetched through file_get_contents(), fopen() or other stream functions, by making the application request a chosen URL or by influencing a server it already contacts, can keep PHP workers busy. Repeated or concurrent requests can cause a denial of service. This issue affects PHP versions from 8.1.32 through 8.1.34, from 8.2.28 before 8.2.36, from 8.3.18 before 8.3.37, from 8.4.5 before 8.4.28 and 8.5.* before 8.5.13.

Denial of service through folded HTTP response headers. The HTTP stream wrapper joins each continuation line of a folded response header to the accumulated value by allocating a new string and copying the whole value, so a response with many short continuation lines takes disproportionate CPU time to parse. An attacker who controls an HTTP or HTTPS response fetched through file_get_contents(), fopen() or other stream functions, by making the application request a chosen URL or by influencing a server it already contacts, can keep PHP workers busy. Repeated or concurrent requests can cause a denial of service. This issue affects PHP versions from 8.1.32 through 8.1.34, from 8.2.28 before 8.2.36, from 8.3.18 before 8.3.37, from 8.4.5 before 8.4.28 and 8.5.* before 8.5.13.

CVE-2026-128064 Mixed-case HTTPS and FTPS URLs can expose data in plaintext. The HTTP and FTP stream wrappers recognise URL schemes case-insensitively, but enable TLS only when the scheme contains a lowercase "s" at a fixed position. A URL such as HTTPS:// or FTPS:// passed to file_get_contents(), fopen() or other stream functions, or received as an HTTP redirect target, is therefore handled over unencrypted HTTP or FTP. An attacker able to observe the network traffic can read data the application expected TLS to protect, including credentials, request bodies and transferred files. This issue affects PHP versions before 8.2.36, 8.3.* before 8.3.37, 8.4.* before 8.4.28 and 8.5.* before 8.5.13.

Mixed-case HTTPS and FTPS URLs can expose data in plaintext. The HTTP and FTP stream wrappers recognise URL schemes case-insensitively, but enable TLS only when the scheme contains a lowercase "s" at a fixed position. A URL such as HTTPS:// or FTPS:// passed to file_get_contents(), fopen() or other stream functions, or received as an HTTP redirect target, is therefore handled over unencrypted HTTP or FTP. An attacker able to observe the network traffic can read data the application expected TLS to protect, including credentials, request bodies and transferred files. This issue affects PHP versions before 8.2.36, 8.3.* before 8.3.37, 8.4.* before 8.4.28 and 8.5.* before 8.5.13.

CVE-2026-128090 PHAR OpenSSL signature bypass via algorithm downgrade. The Phar extension selects the signature verification method from the signature type stored in the archive, and only the OpenSSL types consult the separate .pubkey file holding the trusted public key. An attacker who can modify an OpenSSL-signed Phar archive, but not its public key file, can switch the signature type to a keyless hash such as SHA-256 with a recomputed digest, so the altered archive passes verification even with phar.require_hash enabled. An application that loads the archive may then execute attacker-controlled PHP code. Native, tar-based and zip-based phars are affected. This issue affects PHP versions before 8.2.36, 8.3.* before 8.3.37, 8.4.* before 8.4.28 and 8.5.* before 8.5.13.

PHAR OpenSSL signature bypass via algorithm downgrade. The Phar extension selects the signature verification method from the signature type stored in the archive, and only the OpenSSL types consult the separate .pubkey file holding the trusted public key. An attacker who can modify an OpenSSL-signed Phar archive, but not its public key file, can switch the signature type to a keyless hash such as SHA-256 with a recomputed digest, so the altered archive passes verification even with phar.require_hash enabled. An application that loads the archive may then execute attacker-controlled PHP code. Native, tar-based and zip-based phars are affected. This issue affects PHP versions before 8.2.36, 8.3.* before 8.3.37, 8.4.* before 8.4.28 and 8.5.* before 8.5.13.

CVE-2026-129538 PHP-CGI out-of-bounds read and write during PATH_INFO correction. The PHP CGI binary (php-cgi), in CGI and FastCGI mode with cgi.fix_pathinfo enabled (the default), can perform an out-of-bounds read and write when the path removed from SCRIPT_FILENAME or PATH_TRANSLATED is longer than the supplied PATH_INFO, or when PATH_INFO is empty. This requires a web server mapping that passes such inconsistent values, or a FastCGI listener reachable by untrusted clients. An unauthenticated remote attacker can crash the process, may obtain process memory if the application exposes PATH_INFO or PATH_TRANSLATED, and may corrupt memory. PHP-FPM and the Apache module are not affected. This issue affects PHP versions before 8.2.36, 8.3.* before 8.3.37, 8.4.* before 8.4.28 and 8.5.* before 8.5.13.

PHP-CGI out-of-bounds read and write during PATH_INFO correction. The PHP CGI binary (php-cgi), in CGI and FastCGI mode with cgi.fix_pathinfo enabled (the default), can perform an out-of-bounds read and write when the path removed from SCRIPT_FILENAME or PATH_TRANSLATED is longer than the supplied PATH_INFO, or when PATH_INFO is empty. This requires a web server mapping that passes such inconsistent values, or a FastCGI listener reachable by untrusted clients. An unauthenticated remote attacker can crash the process, may obtain process memory if the application exposes PATH_INFO or PATH_TRANSLATED, and may corrupt memory. PHP-FPM and the Apache module are not affected. This issue affects PHP versions before 8.2.36, 8.3.* before 8.3.37, 8.4.* before 8.4.28 and 8.5.* before 8.5.13.

CVE-2026-129506 SOAP use-after-free when processing DTD entity references. The SOAP extension frees the document type definition (DTD) of a parsed XML document while attribute values can still refer to entities it owns, and can then read freed memory. Removing the DTD also bypasses the SOAP server's rejection of documents that contain one. An unauthenticated remote attacker who can send a crafted request to a SOAP endpoint, or who controls a WSDL or schema document loaded by the application, can crash the PHP process and cause denial of service. Memory disclosure and code execution have not been confirmed. This issue affects PHP versions before 8.2.36, 8.3.* before 8.3.37, 8.4.* before 8.4.28 and 8.5.* before 8.5.13.

SOAP use-after-free when processing DTD entity references. The SOAP extension frees the document type definition (DTD) of a parsed XML document while attribute values can still refer to entities it owns, and can then read freed memory. Removing the DTD also bypasses the SOAP server's rejection of documents that contain one. An unauthenticated remote attacker who can send a crafted request to a SOAP endpoint, or who controls a WSDL or schema document loaded by the application, can crash the PHP process and cause denial of service. Memory disclosure and code execution have not been confirmed. This issue affects PHP versions before 8.2.36, 8.3.* before 8.3.37, 8.4.* before 8.4.28 and 8.5.* before 8.5.13.

CVE-2026-15353 SOAP information disclosure through malformed array dimensions. The SOAP extension reads an uninitialized array position when decoding an encoded array whose arraySize attribute is empty, whitespace-only or non-numeric, or when such dimensions come from a WSDL definition. Four bytes of unrelated heap data can then be used as an integer key in the decoded array. An unauthenticated remote client can trigger this with a crafted request to a SoapServer endpoint, and a malicious SOAP server with a response to SoapClient. Heap memory is disclosed only if the application returns or otherwise exposes the decoded array. This issue affects PHP versions before 8.2.36, 8.3.* before 8.3.37, 8.4.* before 8.4.28 and 8.5.* before 8.5.13.

SOAP information disclosure through malformed array dimensions. The SOAP extension reads an uninitialized array position when decoding an encoded array whose arraySize attribute is empty, whitespace-only or non-numeric, or when such dimensions come from a WSDL definition. Four bytes of unrelated heap data can then be used as an integer key in the decoded array. An unauthenticated remote client can trigger this with a crafted request to a SoapServer endpoint, and a malicious SOAP server with a response to SoapClient. Heap memory is disclosed only if the application returns or otherwise exposes the decoded array. This issue affects PHP versions before 8.2.36, 8.3.* before 8.3.37, 8.4.* before 8.4.28 and 8.5.* before 8.5.13.

CVE-2026-129501 Double free during DOM XML serialization. The XML serializer of Dom\XMLDocument and Dom\HTMLDocument can ownership of a generated namespace prefix between the namespace-prefix maps of an element and a descendant, so the prefix is used after being freed and then freed a second time. The document does not need to be malformed. An application that parses attacker-controlled XML or HTML with these classes and serializes it with saveXml() can be crashed, and repeated requests can cause denial of service. Code execution has not been demonstrated. This issue affects PHP versions 8.4.* before 8.4.28 and 8.5.* before 8.5.13.

Double free during DOM XML serialization. The XML serializer of Dom\XMLDocument and Dom\HTMLDocument can ownership of a generated namespace prefix between the namespace-prefix maps of an element and a descendant, so the prefix is used after being freed and then freed a second time. The document does not need to be malformed. An application that parses attacker-controlled XML or HTML with these classes and serializes it with saveXml() can be crashed, and repeated requests can cause denial of service. Code execution has not been demonstrated. This issue affects PHP versions 8.4.* before 8.4.28 and 8.5.* before 8.5.13.

CVE-2026-129438 Incorrect RFC 3986 URI serialization for oversized input. The Uri\Rfc3986\Uri class does not correctly handle the output-size limit and errors of the uriparser library when converting a URI back to a string. For a URI whose string representation reaches approximately 2 GiB, toString(), toRawString() and other serializing operations can return a truncated or invalid string instead of an error. An application that accepts attacker-controlled URI data of that size, has enough memory to process it and trusts the result may make incorrect validation or routing decisions, and the large allocations can exhaust memory. parse_url() and Uri\WhatWg\Url are not affected. This issue affects PHP versions 8.5.* before 8.5.13.

Incorrect RFC 3986 URI serialization for oversized input. The Uri\Rfc3986\Uri class does not correctly handle the output-size limit and errors of the uriparser library when converting a URI back to a string. For a URI whose string representation reaches approximately 2 GiB, toString(), toRawString() and other serializing operations can return a truncated or invalid string instead of an error. An application that accepts attacker-controlled URI data of that size, has enough memory to process it and trusts the result may make incorrect validation or routing decisions, and the large allocations can exhaust memory. parse_url() and Uri\WhatWg\Url are not affected. This issue affects PHP versions 8.5.* before 8.5.13.

CVE-2026-129292 PHP-FPM status endpoint XSS via unescaped user and script fields. The PHP-FPM full status output includes the request method, authentication user and script filename of each worker without escaping them for the HTML, XML or JSON format. When the status endpoint is enabled, an unauthenticated remote attacker can store markup in a worker's scoreboard entry with an ordinary request, for example through the username of an HTTP Basic authentication header that the web server forwards to PHP-FPM, or through the script filename where the attacker can influence it. When a user views the full status page as HTML, the injected JavaScript runs in the origin of that page. The attacker does not need access to the status endpoint. Malformed XML or JSON output can also disrupt monitoring tools. This issue affects PHP versions before 8.2.36, 8.3.* before 8.3.37, 8.4.* before 8.4.28 and 8.5.* before 8.5.13.

PHP-FPM status endpoint XSS via unescaped user and script fields. The PHP-FPM full status output includes the request method, authentication user and script filename of each worker without escaping them for the HTML, XML or JSON format. When the status endpoint is enabled, an unauthenticated remote attacker can store markup in a worker's scoreboard entry with an ordinary request, for example through the username of an HTTP Basic authentication header that the web server forwards to PHP-FPM, or through the script filename where the attacker can influence it. When a user views the full status page as HTML, the injected JavaScript runs in the origin of that page. The attacker does not need access to the status endpoint. Malformed XML or JSON output can also disrupt monitoring tools. This issue affects PHP versions before 8.2.36, 8.3.* before 8.3.37, 8.4.* before 8.4.28 and 8.5.* before 8.5.13.

CVE-2026-126714 was previously included in this article, but has since been moved to its own article: PHP vulnerability CVE-2026-126714 . For more information these vulnerabilities, refer to the following PHP web page November 19, 2026 Security Releases .

Note : This link takes you to a resource outside of MyF5. The third party could remove the document without our knowledge.

There is no impact; F5 products are not affected by these vulnerabilities.

Security Advisory Status

F5 Product Development has evaluated the currently supported releases for potential vulnerability, and no F5 products were found to be vulnerable.

Note : F5 evaluates only software versions that have not yet reached the End of Technical Support (EoTS) phase of their lifecycle. For more information, refer to the Security hotfixes section of K4602: Overview of the F5 security vulnerability response policy .

Security Advisory Recommended Actions

Protection for your backend pool members

The following will mitigate the exposure of backend applications running on your pool members.

If you are using BIG-IP Advanced WAF, BIG-IP ASM, F5 WAF for NGINX, F5 WAF for Distributed Cloud ( or NGINX App Protect WAF to protect your backend pool members, you can mitigate CVE-2026-115560 and CVE-2026-129292 for your backend pool members by using the following attack signatures enabled in blocking mode::

CVE-2026-115560: PHP Remote Code Execution, ID 200204113 200204113 - ASM/Adv WAF Attack Signature Sets: WebSphere signatures, Server Side Code Injection Signatures, Low and Medium Accuracy Signatures, All Signatures

200204113 - ASM/Adv WAF Attack Signature Sets: WebSphere signatures, Server Side Code Injection Signatures, Low and Medium Accuracy Signatures, All Signatures

CVE-2026-129292: Cross-Site Scripting (XSS) Signature Set

The updated attack signature is part of the newly released attack signature update ASM-AttackSignatures_20261119_173412.im ; you must perform a signature file update to ASM-AttackSignatures_20261119_173412.im or later for these signatures to be available on your system.

For information updating attack signatures on the BIG-IP system, refer to K82512024: Managing BIG-IP ASM Live Updates . For information assigning attack signatures to security policies on the BIG-IP system, refer to the Assigning Attack Signatures to Security Policies chapter of the BIG-IP Application Security Manager: Attack and Bot Signatures guide.

For information updating attack signatures on the NGINX system, refer to the Update F5 WAF for NGINX signatures chapter of the F5 WAF for NGINX guide.

For information updating attack signatures on the F5 Distributed Cloud instance, refer to Best Practices for Signature Staging guide for F5 WAF for Distributed Cloud .

K41942608: Overview of MyF5 security advisory articles

K12201527: Overview of F5 security notifications

K51812227: Understanding security advisory versioning

K4602: Overview of the F5 security vulnerability response policy

K4918: Overview of the F5 critical issue hotfix policy

K000138061: Overview of the F5OS critical issue hotfix policy

K39757430: F5 product and services lifecycle policy index

K9957: Creating a custom RSS feed to view new and updated documents